Edge Glued Sheet

One wide board, built from solid wood.

Narrow strips of solid timber, planed straight and glued edge to edge into a single stable panel — cut, sanded and finished from our own unit in Karnal, to your schedule, delivered pan-India.

Made To SizeCustom Panel Schedules
Solid WoodNo Veneer, No Core Filler
Pan-IndiaDelivery
The Product

A panel that behaves like one piece of timber.

Solid wood doesn't come in unlimited widths, so an edge glued sheet is how we get past that limit without giving up the material itself. Straight strips of timber are selected, planed square and glued edge to edge under pressure until they set as one continuous panel.

Done properly, the joints sit flush and tight enough that the board reads as a single wide plank rather than a set of glued-up pieces — and it moves less with humidity than a single wide board of the same species would on its own.

  • 01Strips graded and grain-matched before glue-up
  • 02Straight edge or finger-jointed, depending on the job
  • 03Panels sized to your cutting list, not a stock sheet
  • 04Sanded flat and ready for lacquer, laminate or veneer
Panel Types

Three ways to build the sheet

Chosen by the job, not the price list
Straight edge glued solid wood panel with continuous grain

Straight Edge Glued

Full-length strips joined along a plain straight edge, so the grain runs unbroken across the panel. The choice when the surface stays natural and visible.

Finger jointed solid wood panel strips before edge gluing

Finger-Jointed

Shorter offcuts joined end to end with an interlocking finger joint, then glued edge to edge. A more efficient use of the timber, made for surfaces that will be painted, laminated or veneered.

Select grade solid wood panel finished on both faces

Select Grade

Strips chosen for clear, consistent grain and finished smooth on both faces — for shutters, tops and panels where every surface is on show.

Close view of a sanded edge glued panel joint
Detailing

The joint should disappear.

A good edge glued sheet doesn't announce where one strip ends and the next begins. We match tone and grain direction before the glue-up, not after, and sand the whole face flat once it has cured so the seam sits level with the surrounding wood.

The same care goes into moisture content — timber that isn't dried evenly will show its joints again in a season or two, so we condition the strips before they ever reach the press.

Specification

What you're ordering.

Material
Edge glued solid wood panels
Species
Teak, oak, ash
Sizing
Cut to your panel schedule
Joinery
Straight edge or finger-jointed
Made at
Karnal, Haryana
Delivery
Pan-India
Next Step

Send us your panel sizes.

Thickness, width, length and the species you have in mind — that's enough for us to come back with what the panels should be and what they'll cost.

Whats App Icon